Bitmain Antminer

Description

*NOT INCLUDE ELECTRICITY*
If you have a 220-264V power supply, Bitmain recommends using an APW3++ power supply.
If you have a 110-120V power supply (US standard outlet), the following power supplies have been confirmed to work properly: SuperNova 1600G2 EVGA

AntMiner S9 Specifications:
1. Hash Rate: 13.5TH/s A 5%
2. Power consumption: 1323W A 10% (on the wall, with APW3++, efficiency 93%, ambient temperature 25C)
3. Energy efficiency: 0.098 W / GH A 7% (on the wall, with APW3++, efficiency 93%, ambient temperature 25 A C)
4. Rated Voltage: 11.60~13.00V
5. ASIC chips: 189 x BM1387
6. Dimension: 350mm(L)*135mm(W)*158mm(H)
7. Cooling: 2x 12038 fans
8. Operating temperature: 0 A C to 40 A C
9. Network connection: Ethernet (network cable not included)

Please note the following:
1. Due to the nature of this product, the refund fee will be higher than usual (usually 40%). If the damage can be proven within the first 30 days, the refund fee is usually waived and the warranty is not voided by overclocking. If any damage occurs, please contact the seller immediately so that we can begin troubleshooting and/or processing the return.
2. Each AntMiner S9 requires TEN 6-pin PCI-e connectors for 12V DC input (must be a very stable power supply). There are three hash boards, each requiring THREE 6-pin PCI-e power connectors and an additional 6-pin PCI-e power connector on the controller. All TEN 6-pin PCI-e power connectors required. Do not connect more than one power supply to the same hashboard to avoid possible damage and instability.
3. Energy consumption data depends on your power supply efficiency, ambient operating temperature and meter accuracy.
4. Power adapter is not included. Bitmain recommends APW3++ or APW7 power supplies for AntMiner S9